Share |

Content about John Sugg

September 22, 2011

CHICAGO — With large-capacity washers and dryers more common in today’s coin laundries, offering some type of commercial service seems to make more sense than ever before.

But taking on commercial accounts is a much different animal than running a vended laundry. There are staffing and equipment issues to consider, contract and billing matters to attend to, and you can’t sit back and wait for customers to come to you.

“(Running a) Laundromat is more of a consumer business, a retail service, whereas commercial is more business to business,” says Andy Wray, sales manager for ACE Commercial Laundry Equipment, a full-service commercial laundry distributor headquartered in Westminster, Calif.

And a coin laundry owner must be intimately involved for their commercial service venture to be successful, advises John Sugg, president/CEO of SAMCO, a Fayetteville, Ga.-based commercial laundry distributor serving the coin laundry, multi-housing, hotel, education and healthcare markets.

“You have to be hands-on,” says Sugg, who is a store owner and route operator himself. “If the owner is actively involved in that segment of the business, it can be very profitable.”

To fine-tune your commercial laundry service, it’s important to coordinate it properly from the get-go.

BUSINESS CONSIDERATIONS

You must have the proper equipment and facility to handle such an endeavor, the distributors say.

“Some of these places are so tight and cramped, to bring on any more work, they might have to adjust to (working) after hours,” says Wray, a third-generation laundry professional. “Obviously, where there’s a will, there’s a way.”

Most of the standard 40- to 60-pound washers will “get you by,” he says. “Depending on some of the cycles that you require, you can make it up a lot in chemicals, using quality products.”

Equipment design and operational capabilities also factor in, according to Sugg.

“You can’t do one size fits all and make it work,” he says. “You need versatility as far as your equipment is concerned. … If you just have a basic machine that has hot, warm and cold as a selector, then you don’t have a very effective model for doing good commercial account business.”

“It might be that you have idle machines sitting there, but if they’re all top loaders, it’s going to be difficult to do some of the requirements from some of the hotels and stuff like that,” Wray adds.

With the right equipment in play, there should be no need for you to segregate machines for commercial accounts, Sugg says.

But there are limitations to the scope of commercial service that a traditional self-service laundry can offer. When you make the decision to take on commercial work that involves ironing or other special treatment, it’s probably time for you to branch out.

“Then you really are getting into a whole other segment of business,” Sugg says. “We’ve seen it done, but at the point that you’re going to bring in a roll ironer, you probably should be looking at setting up an industrial laundry to do that.”

“When you start getting into pressing and stuff like that, you step into the commercial/industrial arena,” Wray says.

From a management standpoint, serving commercial accounts requires knowledge in contract negotiations, invoicing and other areas. You may also want to review your insurance coverage to make sure it’s sufficient for the changes you’re looking to make.

“Somebody who doesn’t have organizational tools in the first place probably should shy away from (commercial work),” Sugg warns.

Monday: Identifying opportunities that make sense...

August 22, 2011

ATLANTA — Southern Automatic Machinery Co. (SAMCO) has changed its name and is moving today into a larger, more customer-friendly location, the company says.

The company officially changed its name to the acronym that customers already use: SAMCO.

“Our company has history in the Atlanta area, and rather than lose part of our heritage by developing a new name, we decided to become more modern and use our initials,” says John Sugg, president and CEO of SAMCO.

The company has been operating as Southern Automatic Machinery Co. since the 1940s, when it was founded. SAMCO got its name because it was located in the South, and at the time, washing machines were referred to as automatic machines.

SAMCO’s new, 10,400-square-feet facility is located at 133 N. 85 Parkway in Fayetteville, Ga.

“These changes were made with the customer in mind, and we believe it will strengthen our existing relationships while helping to forge new ones,” Sugg says. “We’ll remain the company our customers have come to know and trust, and [we] look forward to continued success as we approach 2012.”

SAMCO is a commercial laundry distributor serving the coin laundry, multi-housing, hotel, education and healthcare markets. It is the exclusive provider of Speed Queen laundry equipment and technologies in parts of Georgia, Alabama and South Carolina.